The INLINE 4 Software installation
is a typical Windows-based, self-executing installation. Version
5.6.3.1 of the executable setup file installs the latest INLINE 4
PC Driver, which
allows RP1210-compatible software applications to communicate with
the INLINE
4 adapter. The
latest version of the reflash utility and version 4.45 of the firmware
are also included in this download and will be installed automatically
in their
proper
folders in your PC when you run the install program, as described below.
The steps for installing the INLINE
4 software are listed below.
Download the appropriate INLINE 4 zip file by clicking on the button above (note that unless you have a 64-bit Operating System, you should use the 32-bit file).
Unzip and extract the executable file using
zip/unzip software.
Click on the Windows Start menu and click Run.
Click on the Browse button and locate the file you have downloaded.
Click the OK button to install the latest INLINE 4 Driver, reflash utility, and firmware on your PC.
Follow the onscreen instructions to complete the installation.
Connect +8 V to +50 V power to your INLINE 4 adapter through the DB25 cable you have.
Use your DB9F to DB9M serial cable to connect the INLINE 4 adapter to the proper PC COM port.
Follow the Driver Installation and other instructions located on the On-line Manuals page.
